Ferrotec EMG Series - Water-based Ferrofluid
Type: EMG 304
Ferrotec’s EMG 304 Ferrofluid is a member of Ferrotec’s family of EMG Series - Water-based ferrofluids. Unlike Ferrotec's APG series of ferrofluids that have been optimized for audio speaker applications, Ferrotec’s EMG Series ferrofluids address a broad range of application requirements and can be used for experimentation and application development. Ferrotec's water-based EMG Series are typically used in applications where rapid evaporation or the ability to mix ferrofluid into a water-based system is required. EMG 304 ferrofluid is Black-brown fluid and uses Anionic surfactant.
EMG 304 Specifications and Physical Properties
|Nominal Particle Diameter||10 nm|
|CGS Units||SI Units|
|Saturation Magnetization (Ms)||275 Gauss||27.5 mT|
|Viscosity @27°C||40 cP||40 mPa·s|
|Density @25°C||1.24 g/cc||1.24 103 kg/m3|
|Initial Magnetic Susceptibility||0.40||5.03|
|Magnetic Particle Concentration||4.5 % vol.|
|Nature of Surfactant||Anionic|
EMG 304 Ferrofluid Additional Information
|For more information about material handling, refer to the MSDS (Material Safety Datasheet) for the EMG Series - Water-based family of products.
Download the emg300msds.pdf »